-
HB01 Hoboken pier No 1
New York Piers, Triton 1/1250 scale HarbourHoboken Pier No 1 part of a set of three piers modelled on the Hoboken piers found on the opposite side of the river to the Manhattan Island piers. Each pier model has been cast in resin and comes painted plus etched brass gantries. Holes have been drilled to receive the gantries which are despatched unattached. Please note colours may vary. Approx dimensions: 26cm x 4cm x 1.7cm at highest point.£60.00 -
HB02 Hoboken pier Red Star Line
New York Piers, Triton 1/1250 scale HarbourCast in resin and painted, this Hoboken pier model depicts the Red Star Line pier. Dimensions are approx. 26cm x 4cm x 2cm at highest point. Each comes with holes drilled ready to take the etched brass gantries which travel better unattached. Please note colours may vary from illustration.£60.00 -
HB03 Hoboken pier Holland America Line
New York Piers, Triton 1/1250 scale HarbourCast in resin, this Hoboken pier is painted and comes in two parts; the main section measures 26cm x 6.8cm x 2.3cm at highest point. The additional smaller unit measures 6cm x 4cm x 2.4cm at highest point, all dimensions are approximate and colours may vary from illustration. Each of the main piers comes with holes ready drilled to take the etched brass gantries which travel better if separate.£84.00 -
HB04 Set of all three Hoboken piers
New York Piers, Triton 1/1250 scale HarbourThis is a set of all three Hoboken piers; HB01, HB02 and HB03 giving Hoboken Pier No 1, Red Star Line and Holland America Line. All come ready painted but please note colours may vary from illustration but all three will be the same as each other. Holes are drilled in the piers to receive the etched brass gantries which travel better if separate. Approx dimensions are: HB01 26cm x 4cm x 1.7cm at highest point, HB02 26cm x 4cm x 2cm at highest point and HB03, large pier 26cm x 6.8cm x 2.3cm at highest point, smaller item, 6cm x 4cm x 2.4cm at highest point.£192.00 -
NY7 New York pier for merchant liners/cargo ships
New York PiersOne of three new New York pier models of the kind used by merchant liners and cargo ships to discharge their cargos. These types of piers were built in all large seaports worldwide. We are offering them painted or unpainted. Models are all cast in resin, dimensions: 13.7cm x4cm x 2.5cm.£20.00 – £30.00 -
NY8 New York pier for merchant liners/cargo ships
New York PiersThis is one of three New York pier models we have introduced which are of the type used by merchant liners and cargo ships to discharge their loads. These smaller piers not only served New York but were built in all large seaports worldwide. Models are cast in resin having the following dimensions: 14cm x 4cm x 2cm and available in unpainted version or painted.£20.00 – £30.00 -
NY9 New York pier for merchant liners/cargo ships
New York PiersThis is one of three new models of New York piers we have introduced to represent the kind of pier used by merchant liners and cargo ships to discharge their loads. These piers not only served New York but were built in all large seaports world wide. Models are cast in resin and available either unpainted or painted . Dimensions are: 13.6cm x 4cm x 2cm.£20.00 – £30.00 -
PM16 Boatyard
Harbour modules, Triton 1/1250 scale HarbourCast in resin this boatyard looks very realistic with the boatshed, office block, cars, boats and 'spare parts' pile. Offered painted or unpainted . Please note colours on painted items will vary.£9.00 – £18.00 -
TB1A Two low tide quay sections
Accessories, Triton 1/1250 scale HarbourThis pack comprises 2 quay pieces which are cast in resin and painted grey. Dimensions are: 100mm x 20mm x 7mm approximately. Classed as low tide quay sections and complement TB1.£10.20 -
TB29 Stacked dockside cargo
Accessories, Triton 1/1250 scale HarbourTwo sprues of blocks plus two piles of stacked logs and two of assorted cargo. Metal cast and painted.£12.24 -
TB52 Quay sections
Accessories, Triton 1/1250 scale HarbourSet of two quay sections made of plastic and having the following dimensions: 10cm L x 5cm W and 6mm deep.£10.00 -
TB53 Two High Tide Quays
Accessories, Triton 1/1250 scale HarbourThis pack contains 2 high tide quay sections cast in metal and supplied painted grey. Dimensions of each piece: approximately 120mm x 40mm x 4mm.£14.40 -
TB53a High Tide Quays
Accessories, Triton 1/1250 scale HarbourIntroduced to complement our range of high tide quays, this pack has two pieces each measuring approximately 100mm x 50mm x 4mm. They are cast in resin and are supplied painted.£14.40 -
TB54 Two High Tide Quays – narrow
Accessories, Triton 1/1250 scale HarbourPack contains 2 metal cast and painted quay sections for high tide. Dimensions are: 120mm x 20mm x 4mm approximately for each piece.£10.80 -
TB55 Selection of small quay sections for high tide
Accessories, Triton 1/1250 scale HarbourThe six sections comprise 3 x 57mm x 20mm x 4mm approx. and 3 x 57mm x 10mm x 4mm approx. All are cast in metal and are supplied painted grey.£12.24 -
TB56 Selection of corner quays and quay end pieces – high tide
Accessories, Triton 1/1250 scale HarbourThis selection comprises the following: 2 equilateral triangular pieces 37 mm along each side, 2 isosceles triangular pieces 37 mm on two sides and 18 mm on third side, 2 equilateral triangular pieces 18 mm along each side and 3 quay end pieces each semicircular; 2 with straight edge of 9 mm and 1 which has a straight edge of 18 mm. All are cast in metal and are supplied painted grey. All dimensions are approximate.£14.40 -
TBS1 Selection of vessels
Special Offers, Triton 1/1250 scale HarbourThis selection contains an assortment of craft for your diorama: 22 assorted loaded and unloaded barges, 2 power driven river barges, 1 large diesel tug, 2 small steam tugs and 1 large steam tug. All are cast in metal and are supplied painted, colours may vary from illustration.£34.80 -
TBS2 Triton Special Offer pack
Accessories, Triton 1/1250 scale HarbourThis selection of our Triton 1/1250 scale models provides an assortment of items to create a small quayside diorama. See below for details. All items except quays are painted and colours supplied may vary from illustration.£38.00 -
TB68 Bowstring girder bridge
Accessories, Triton 1/1250 scale HarbourThis bowstring girder bridge is cast in resin and painted and comes with road and bridge supports.£30.00 -
TB47 Modern repair/building shed
Buildings, Triton 1/1250 scale HarbourCast in one piece in resin, this modern repair/building shed is impressive. It measures, approximately: 105mm in length, 55mm in width, 50mm in height at the front and 40mm at the rear. Painted or unpainted.£20.00 – £36.00 -
TB67 Two post 1990 curved roof warehouses
Buildings, Triton 1/1250 scale HarbourPack of two (picture shows just one), post 1990 curved roof warehouses. Each is cast in resin, measures 21mm x 23mm and is available painted or unpainted.£6.00 – £11.00 -
TB66 Two post 1990 metal clad warehouses
Buildings, Triton 1/1250 scale HarbourTwo post 1990 metal clad warehouses (picture shows just one), each measuring 23mm x 30mm. The models are cast in resin and are currently available painted and unpainted.£6.00 – £11.00 -
TB65 Two post 1990 metal clad warehouses and administration units
Buildings, Triton 1/1250 scale HarbourPack of two post 1990 metal clad warehouses and administration units (picture shows just one). Each measures 24mm x 34mm, is cast in resin and is available painted and unpainted£6.00 – £11.00 -
TB64 Two post 1990 factory warehouses with attached administration offices
Buildings, Triton 1/1250 scale HarbourThese post 1990 factory/warehouses are similar to those used on our Harbour modules (picture shows just one). They are cast in resin and currently available painted and unpainted.£6.00 – £11.00 -
TB63 Two northlight factory/warehouses with attached administration offices
Buildings, Triton 1/1250 scale HarbourPack of two (picture shows just one) northlight factory/warehouses with attached administration offices. Each measures 24mm x 65mm are cast in resin and available painted and unpainted.£6.00 – £11.00 -
TB62 Two large wooden warehouses
Buildings, Triton 1/1250 scale HarbourTwo large wooden warehouses (picture shows just one) as used on our Harbour modules. Each measures 19mm x 50mm and comes painted.£12.00 -
TB61 2 x 3-storey Victorian warehouses
Buildings, Triton 1/1250 scale HarbourTwo 3-storey Victorian warehouses (picture shows just one), measuring 28mm x 28mm each as used on our Harbour modules. Items are cast in resin and painted.£11.00 -
TB60 Large 4-storey Victorian warehouse,
Buildings, Triton 1/1250 scale HarbourOne of the buildings used on our Harbour modules, this large 4-storey Victorian warehouse has vents on its roof, measures 133mm x 21mm approximately and is available cast in resin and painted.£14.00 -
TB28 Four floodlight gantries
Accessories, Triton 1/1250 scale HarbourPack of 4 floodlight gantries, cast in white metal and painted ready for use.£12.24 -
PM15 Twentieth century quay (1900-2000)
Harbour modules, Triton 1/1250 scale HarbourThis module depicts a 20century quay circa 1900 - 2000. Cast in resin and painted, it has a selection of warehouses, trains, vehicles and cranes.£54.00 -
PM14 Modern, post 1990 harbour quay
Harbour modules, Triton 1/1250 scale HarbourNewest addition to harbour range - modern, post 1990 harbour quay incorporating an assortment of buildings, transport vehicles plus cranes. Dimensions: 290mm x 50mm, cast in resin and available painted and unpainted.£30.00 – £54.00 -
PM13 Marina with ships, chandlery, cafe and boat yard
Harbour modules, Triton 1/1250 scale HarbourComplete marina model, cast in resin and painted. Dimensions: 11cm x 6cm approximately.£32.00 -
TB26 10 strips of assorted freight trains & locos
Triton 1/1250 scale HarbourPack of 10 container trains and locos. Cast in white metal and painted ready for use.£15.00 -
TB25 3 container trains, locos & 10 container lorries
Accessories, Triton 1/1250 scale HarbourUseful pack of 3 container trains, locos and 10 lorries in assorted colours. Cast in white metal and painted.£15.00 -
PM12 4 blocks of back to back terraced housing
Harbour modules, Triton 1/1250 scale HarbourOne complete harbour module comprising 4 blocks of back to back terraced housing, cast in resin and painted ready for use. Dimensions: 215mm x 55mm x 11mm in height.£16.00 -
PM11 Harbour breakwater, 3 corner sections
Harbour modules, Triton 1/1250 scale HarbourThree harbour breakwater corner sections, cast in resin and painted.£12.24 -
PM10 Harbour outer breakwater ends, 2 sections
Harbour modules, Triton 1/1250 scale HarbourTwo outer breakwater end sections with beach lights. Dimensions: 16mm diameter. Cast in resin and painted.£12.24 -
PM9 Harbour outer breakwater, 3 sections
Harbour modules, Triton 1/1250 scale HarbourHarbour outer breakwater in 3 sections. Cast in resin and painted.£12.24 -
PM8 Shore extension jetty and pipes for PM7
Harbour modules, Triton 1/1250 scale HarbourShore extension jetty and pipes can be used with PM7. Cast in resin and painted.£6.00 -
TB38 2 Victorian brick-built warehouses, 6 storey
Buildings, Triton 1/1250 scale HarbourPack of 2 Victorian brick-built warehouses, 6 storey high, painted.£15.00 -
TB34 modern sawtoothed warehouse type 2 (1940-96)
Buildings, Triton 1/1250 scale HarbourModern sawtoothed warehouse type 2, in use around 1940-1996. Roof cast in white metal, base in resin. Supplied painted.£14.40 -
PM7 super tanker loading/unloading jetty
Harbour modules, Triton 1/1250 scale HarbourHarbour module jetty to provide super tanker loading/unloading. Cast in resin and painted.£10.00 -
PM6 Oil storage tanks for supertanker loading/unloading terminals
Harbour modules, Triton 1/1250 scale HarbourHarbour module number 6 has oil storage tanks for supertanker loading/unloading terminals. Cast in resin and painted, approx dimensions: 100mm x 50mm, quay depth 5mm. Painted and unpainted£13.00 – £26.00 -
PM5 Oil refinery storage tanks
Harbour modules, Triton 1/1250 scale HarbourOil refinery storage tanks, tankers road and rail.. Cast in resin and painted this module is ready for use. Please note colours may vary. Dimensions: approx 100mm x 50mm and quay depth is 5mm. Painted and unpainted£13.00 – £26.00 -
PM4 Oil refinery with rail terminal
Harbour modules, Triton 1/1250 scale HarbourReady to use harbour module of an oil refinery including rail terminal.£28.80 -
NY6 United States Lines Super Liner Pier 86
New York Piers, Triton 1/1250 scale HarbourNew York Harbour Pier 86. Used by United States Lines for Super Liners. Cast in resin and painted.£60.00 -
NY5 French Super Liner Pier 88
New York Piers, Triton 1/1250 scale HarbourNew York Harbour Pier number 88. French Super Liner Pier. Cast in resin and painted.£60.00 -
NY4 Cunard Super Liner Pier 92
New York Piers, Triton 1/1250 scale HarbourNew York Harbour Pier, Cunard Super Liner Pier 92, cast in resin and painted.£60.00